Stable Performance 15 KG / Barrel Water Resistance Artificial Grass Glue for Glue Water

Descrition:

15 kg/ barrel

Features: water resistance, strong adhesion, easy to use, easy to long distance transport.

Features:
1. Environmental-friendly: Extraordinary low benzene and VOC, no hazardous materials and additives.
2. High solid content: 34% solid content, much higher than conventional adhesives, which can save adhesive consumption by 30%-40%.
3. Freezing temperature resistant: no influence even at -15°C to -20°C and easy for transportation and bonding in winter.
4. Super initial bonding power, good penetration property and fast drying speed.
5. Stable performance: moisture and water-immersion resistant after hardening, good impact resistant, which assures long service life.

Technical Index:
Appearance: light yellow viscous liquid
Viscosity: 55-60 ku / 30°C
300-550 MPa. S/25°C
Solids Content: 34%-36%
Shear Strength: 30 minutes: ≥0.7mpa
48 hours: ≥1.1mpa
Specific Gravity: 0.86-0.87kg/L
VOC: ≤700 g/L

Application:
1. Surface preparation: Bonding surface should be dry, clean and free of dust and rust. Smooth surface such as plywood, rubber, must be sanded first to make it coarse. After that,clean the surface and apply the adhesive.
2. Gluing: Mix up the adhesive before use. Pour adhesive on the two bonding surfaces separately and spread it with brush or scraper. To achieve the best bonding performance, the application should be done toward the same direction and evenly.
3. Airing: After application of the adhesive, enough time should be given to let the solvent evaporate completely to avoid bubble or stickiness.
4. Bonding: The application should be done once and for all. Aim the two surfaces, bond together and press. Don’t move the two surfaces back and forth, or the bonding effect will be weakened.

The last explaining right of all the things above belongs to JUNHONG.
If you have any questions , please call 13093089277